Welcome to visit Fusang!
Current location:front page >> mechanical

What to do if the heating exhaust valve leaks

2025-12-26 11:33:32 mechanical

What to do if the heating exhaust valve leaks

With the advent of winter, the frequency of heating use increases, and leakage of exhaust valves has become a common problem in many households. This article will give you a detailed introduction to the causes, solutions and preventive measures of leakage in the exhaust valve to help you quickly deal with this problem.

1. Common causes of water leakage in heating exhaust valves

What to do if the heating exhaust valve leaks

ReasonDescription
Valve agingLong-term use results in wear of sealing rings or corrosion of metal parts
Water pressure is too highSystem pressure exceeds the exhaust valve's tolerance range
Improper installationThe valve is not tightened or the sealing material is insufficient
Impurities clogImpurities in the water block the valve, preventing it from closing completely

2. Emergency handling steps

1.Turn off heating system: First, close the main heating valve to prevent continued water leakage.

2.Prepare water receiving tools: Use a towel or bucket to catch leaks to avoid soaking the floor.

3.Check the location of the leak: Confirm whether the valve body or the connection is leaking.

4.temporary seal: Waterproof tape can be used to wrap the leakage point (only minor leakage).

ToolsPurpose
adjustable wrenchDisassemble valve
raw material beltThread seal
New exhaust valveReplace damaged parts
screwdriverClean the valve core

3. Professional maintenance methods

1.Replace sealing ring: Applicable to the condition that the valve body is intact:

- Shut down the system and relieve pressure

- Remove the screws on the top of the valve

- Replace the sealing ring with the same specification

2.Whole valve replacement: When the valve is seriously damaged:

- Measure the original valve size (common ones are 1/2", 3/4")

- Choose copper or all stainless steel valves

- Wrap 15-20 turns of raw material tape before installation

4. Preventive measures

measuresImplementation methodcycle
Exhaust gas regularlyOperated once a month during heating seasonmonthly
water quality treatmentInstall a filter or add a corrosion inhibitorevery year
Pressure detectionMaintain system pressure 1.5-2barweekly

5. Things to note

1. Before processing, be sure toTurn off heating systemAnd wait for the water temperature to drop to prevent burns.

2. If water leakage is accompanied byLarge amounts of rust or black sewage, it is recommended to contact professionals for system cleaning.

3. Residents of high-rise buildings are advised to let the property management handle the problem, which involves the pressure balance of the entire heating system.

4. Pay attention when replacing valvesDistinguish between automatic exhaust valve and manual exhaust valve, the two structures are different.

6. Maintenance cost reference

ProjectMaterial feeLabor cost
Replace sealing ring5-20 yuan50-100 yuan
Replace ordinary valve30-80 yuan80-150 yuan
Replace automatic exhaust valve100-300 yuan150-200 yuan

Through the above methods, most exhaust valve leakage problems can be effectively solved. If you encounter complex situations, it is recommended to contact professional HVAC maintenance personnel in time to ensure the safe operation of the heating system.

Next article
  • What is the maximum absorption wavelength?In fields such as chemistry, physics and biology,Maximum absorption wavelength(λmax) is an important concept. It refers to the wavelength at which a certain substance absorbs light with the greatest intensity in the absorption spectrum. This parameter is widely used in spectrophotometry, pharmaceutical analysis, environmental monitoring and other fields. This article will co
    2026-01-22 mechanical
  • What is the hardness unit of HA?In materials science and engineering, hardness is an important measure of a material's ability to resist deformation or scratching. Different hardness testing methods correspond to different hardness units, among whichHA(Härte A) is a unit of Shore Hardness, mainly used to measure the hardness of soft materials such as rubber, plastics and elastomers. This article will combine recent
    2026-01-20 mechanical
  • What does optical signal mean?In the field of technology and communications, optical signal is a term that appears frequently. With the popularization of 5G, optical fiber communication and other technologies, the application of optical signals is becoming more and more widespread. This article will combine the hot topics on the Internet in the past 10 days to provide you with a detailed analysis of the meaning, appl
    2026-01-17 mechanical
  • What is chromatography stationary phaseChromatographic stationary phase is the core component of chromatographic analysis and plays a key role in the chromatographic separation process. The choice of stationary phase directly affects the separation effect, analysis speed and detection sensitivity. This article will introduce in detail the definition, classification, characteristics and application fields of chromatog
    2026-01-15 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line